Menu
Your Cart

Chengal Timber Edge & Surface Smooth Square Planed 1" (T) x 2" (W) x 10' (L) (Grade A)

Chengal Timber Edge & Surface Smooth Square Planed 1" (T) x 2" (W) x 10' (L) (Grade A)

RM30.00
Price in reward points: 12000
  • Model: CG-1x2x10
Products Sold: 7
Product Views: 6465
Add to Cart
Click to share this page to your friends & families and start earning. Affiliate

Features 

  • Species: Chengal. 
  • Material: Hardwood. 
  • Actual Thickness: ~18mm. 
  • Actual Width: ~38mm. 
  • Finishing: Smooth square planed (4 Edges & 4 Surfaces). 
  • Treatment: Untreated. 
  • Stability: Air drying. 
  • Subject to stock availability. 

  

Description 

The Standard Malaysian Name for the timber of Neobalanocarpus heimii (Dipterocarpaceae). Vernacular names applied include penak (Peninsular Malaysia). The name chengal is so popular, that many other species have been given vernacular names bearing the name chengalNeobalanocarpus is a monotypic genus. The sapwood is light yellow and sharply defined from the heartwood, which is light yellow-brown with a distinct green tinge, darkening on exposure to dark purple-brown or rust-red. 

  

Also known as Chengal (Brunei); and Chan Ta Khien, Chi-ngamat, Takian Chan and Takian Chantamaeo (Thailand). 

  

Density 

The timber is a Heavy Hardwood with a density of 915-980 kg/m3 air dry. 

  

Natural Durability 

The timber is classified as naturally durable and is normally very resistant to termite attack and fungal infestation. Under graveyard test conditions, untreated specimens of size 50 mm x 50 mm x 600 mm lasted 9 years. Treated specimen of the same size and test conditions lasted about 19 years. Untreated railway sleepers of size 238 mm x 125 mm x 1,950 mm laid under severe environmental conditions gave an average service life of 19 years. 

  

Preservative Treatment 

This timber has been classified as moderately difficult to treat. 

  

Texture 

Texture is fine and even, with shallowly to deeply interlocked grain. 

  

Strength Properties 

The timber falls into Strength Group A (Engku, 1988b) or SG 1 (MS 544:Part 2:2001). 

  

Strength Properties of Chengal
Test ConditionModulus of Elasticity (MPa)Modulus of Elasticity (MPa)Compression Parallel to Grain (MPa)Compression Parallel to Grain (MPa)Shear Strength (MPa)
Green18,100122691214
Air dry19,600149751214

  

Machining Properties 

It is slightly difficult to resaw and is easy to moderately easy to cross-cut. Planing is easy and the planed surface produced is smooth. 

  

ConditionSawingPlanningBoringTurning
Rip-sawingCross-cuttingEase of PlaningQuality of FinishEase of BoringQuality of FinishEase of TurningQuality of Finish
GreenSlightly DifficultEasyEasySmoothEasySmooth--
Air drySlightly DifficultModerately EasyEasySmoothEasySmoothEasySmooth

  

Nailing Properties 

Nailing property is rated as very poor. 

  

Air Drying 

The timber seasons slowly with moderate end-checking and surface-checking as the main sources of degrade. 13 mm thick boards take approximately 5 months to air dry, while 38 mm thick boards take 6 months. 

  

Kiln-Drying 

Kiln Schedule B is recommended. The timber dries very slowly and is extremely prone to surface-checking. 25 mm thick boards take approximately 30 days to kiln-dry from 50% to 10% moisture content. 

  

Schedule Kiln B
Moisture Content (%)Temperature (Dry Bulb)Temperature (Wet Bulb)Relative Humidity (%) (approx.)
°F°C°F°C
Green10540.510138.085
4010540.59937.080
3011043.510239.075
2511546.010540.570
2013054.511546.060
1514080.011847.550

  

Shrinkage 

Shrinkage is fairly low, with radial shrinkage averaging 1.1% and tangential shrinkage averaging 2.6%. 

  

Defects 

Small pin-holes, caused by ambrosia beetles boring into the living trees, are a common and characteristic defect of chengal. These small holes are often numerous, but although unsightly, they are only in exceptional cases sufficiently numerous to impair the strength of the timber. These ambrosia beetles die when the timber is seasoned and thus the damage is restricted almost entirely to that which occurs in the green timber. Big trees of chengal are sometimes hollow at the centre and badly attacked by large borers, and occasional trees are seriously infected by a fungus (Fomes spp.), which initially gains entry through broken branches or other wounds and eventually reduces the timber to a dark pulpy condition. With the exception of pin holes, the timber of chengal is free from knots and other defects characteristic of sawn timber. 

  

Uses 

The timber is suitable for all forms of heavy construction, railway sleepers, heavy duty furniture, laboratory benches, bridges, marine construction, boat building, telegraphic and power transmission posts and cross arms, piling, mallets, flooring (heavy traffic), decking, vehicle bodies (framework and floor boards), fender supports, cooling towers (structural members), staircase (balusters, carriages, handrails, newels, risers, stringers, treads, bullnoses, round ends and winders), columns (heavy duty), door and window frames and sills, tool handles (impact), carving works and other uses where strength and durability are required. 

  

Disclaimer 

All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics. 

Write a review
Note: HTML is not translated!
Bad Good
Captcha