CMI 681 Grey Finish Coat Plaster Cement Based 25KG
CMI 681 Grey Finish Coat Plaster Cement Based 25KG
- Brand CMI
- Model: CMI-681
Description
CMI FINISH-COAT is a high quality polymer modified water-resistant cement-based thin plaster for finishing on wall and ceilings. CMI FINISH-COAT can be used on CMI BASE-MORTAR, concrete and rendered surfaces to give a high quality plaster surface suitable for either painting or wallpapering.
Advantages
- Consistent Quality.
- Minimizes Cracks.
- User Friendly.
- Water Resistant.
- Enhanced Workability.
- Cost Effective.
- Optimum Bond Strength.
- Cleaner Worksite.
Technical Data
| CoIour | Grey |
| Filler | Limestone Powder |
| Additives | Water soluble polymers to improve workability, water-retention and adhesion |
| PH | 12 |
| Aggregate size | O.5 mm max |
| Potlife | 2 hours |
| Coverage | Approximately 1.2 kg/ m2 / mm thick |
| Recommended thickness | 1 – 2 mm per coat |
| Density | Dry 1 1.3 kg / litre ; Wet 1 1.6 kg/ litre |
| Toxicity | Chemically inert and non-toxic |
| Mixing ratio | Approximately 45% water on dry material |
| Packing | 25 kg |
Application Procedure
Receiving surface for plastering must be sound and free from dirt, dust, grease and traces of foreign materials that will affect adhesion. Where necessary, dampen the dry concrete or rendered surfaces before application of CMI FINISH-COAT. Add a 25 kg Bag of CMI FINISH-COAT to approximately 12.5 litres of clean water. Use a power drill to mix thoroughly. Allow mixture to stand for 1O minutes for additives to dissolve. Before using the plaster, mix again. Apply by using a steel trowel or spatula.
Storage
Storage life is approximately 6 months if stored in a cool and dry place.
Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.
