Sika

Formerly Known As DAVCO GROUT 280 ECO   ..

DescriptionSikalastic®-1 KMY is a one-component, flexible, fiber-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected gra..

DescriptionSikaBond®-124 Instant Nails is a 1-part, rigid, adhesive with high final strength that bonds the most common construction & industry material substrate. Internal and covered ext..

DescriptionDavco Admix 168 is a polymeric latex additive exclusively formulated to improve the bonding strength and adhesion of thin and medium bed adhesive mortars, renders, screeds, and plasters..

DescriptionDavco Admix 168 is a polymeric latex additive exclusively formulated to improve the bonding strength and adhesion of thin and medium bed adhesive mortars, renders, screeds, and plasters..

Description A solvent-free, 2-component low viscosity and semi-elastic liquid, based on epoxy resins. Especially for sealing into non-structural cracks and cavities in the concrete. ..

Uses To stop water leaks and seepage through rock and concrete, as well as through joints between concrete and steel (bolt surroundings, ducts, sheet piles, etc.) in subways, culverts, tunnel..

Description Cementitious mortar for paste for smoothing and finishing.   Advantages Good adhesion on gypsum walls.  Fast setting.  Can be over..

Description Formerly known as Brefill® Mortar. SikaWall®-191 Base is a cement based filling and levelling plaster for concrete surfaces. SikaWall®-191 Base consists of finely crus..

Description Sikagard  703 Groutseal is an low viscosity emulsion, ready to use, silane/siloxane combination based, water repellent impregnation design to deeply penetrate to any hairline..

Description Sika Latex is a modified Styrene Butadiene emulsion to be mixed with cement (neat) or cement/ sand mortar for improved adhesion and water resistant properties Sika-Latex ..

Product Description SikaCoat®-300 Cool (Formally known as SikaFill® MY) is an elastic covering of creamy consistency, using styrene-acrylic copolymers in the watery emulsion which, on..

Product Description SikaCoat®-300 Cool (Formally known as SikaFill® MY) is an elastic covering of creamy consistency, using styrene-acrylic copolymers in the watery emulsion which, on..

Product Description SikaTop Seal- 109 MY is a cementitious, two-part, polymer-modified flexible waterproofing coating. It is applied to concrete and mortar to prevent water infiltration. ..

Description SIkaCeram-88 is cementitious tile adhesive, supplied ready to use with the addition of water, for bonding ceramic tiles, porcelain tiles and mosaics of every type of floors, walls..

Description Sikafloor®-3 QuartzTop is a one-part, pre-blended, (coloured) mineral dry shake hardener for concrete comprising of cement, specially selected quartz mineral aggregates and ad..

Description SikaGrout 215 is a pumpable dual-shrinkage compensated, self-leveling, prebagged cementitious grout with extended working time to suit local ambient temperatures.  &..

DescriptionStyrenated polyester-based 2-component anchoring adhesive. AdvantagesFast curing Non-sag, even overhead ETA for anchoring in uncracked concrete Low wastage..