Pentens Easysov WP5 L-210 Synthetic Rubber Based Waterproof Thermal Insulation Coating 20KG
Pentens Easysov WP5 L-210 Synthetic Rubber Based Waterproof Thermal Insulation Coating 20KG
RM357.40
Price in reward points: 142800
- Brand Pentens
- Model: PT-WP5-20
Products Sold: 3
Product Views: 11992
Description
Pentens EasySov WP5+ is a state-of-the-art 5 in 1 multifunctional synthetic rubber-based waterproofing product. The use of ultra high-pressure water jet cutting process treated recycled rubber granules to replace the greater part of conventional fillers and aggregates in product formulation, up to 40% of total product weight, makes Pentens EasySov WP5+ an eco-friendly coating with extraordinary physical properties.
Technical & Physical Data
| Form | High viscosity paste |
| Colour | Greyish-white |
| Resin | 100% acrylic |
| Solid Content (%) | >80 |
| Water Absorption (%) (BS1881-122:1983) | 0.78 |
| Elongation (%) (ASTM D412-06ae2) | >60 |
| Tensile Strength at Peak | 1.6 N/mm² |
| (ASTM D412-06ae2) Thermal Transmission (W/mK) | <0.1 |
| Corrosion Resistance (ASTM G8-96 60 days) | No peeling, cracking, blistering |
| Shelf Life | 1 year when unopened and damaged |
| Storage Condition | Store in a dry, cool place |
| Packaging | 5kg /pail 20kg /pail |
| Catalogue(PDF) | |
Advantages
- Good mechanical and chemical properties.
- Strengthen the water-resistance and anti-impact.
- Enable the filling element with good compatibility and dispersibility.
- Low bubbling.
- Anti-freezing.
- Less dusting.
- Superb adhesive strength.
- It can be applied directly on damp or wet surfaces.
- Flexural strength.
- Non-corrosive.
- Non-flammable.
- Non-toxic.
Areas of application include:
Sealing
- Cracks and joint on RC roof.
- Wall and ceiling.
Waterproofing
- Roof.
- Wall.
- Gutter.
- Zinc.
- Metal Roof.
- Planter Boxes.
Method of Statement
 |  |  |
| Apply T-007 as a primer layer. | Mix thoroughly. (Can add 0.3kg clean water to mix container) | Apply directly to construction surface by using brush or spray. |
 |  |  |
| Apply directly to construction surface by using roller | Repeat step 2 after 4 hours | Finished |
|
|
Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.
