Propan Paint Ultra Proof Water Proofing Coating 1L
Propan Paint Ultra Proof Water Proofing Coating 1L
- Brand Propan
- Model: PP-UPWC-1L
Available Options
Description
ULTRAPROOF is a waterproof and rainproof protective coating formulated with elastomeric water based acrylic polymer. It is very elastic with high elongation (+-600%), UV light resistant and water resistant.
Advantages
- Waterproofing.
- Rainproofing.
- Bridging hair cracks.
- Fungi resistance.
- Heat insulation.
- Decorative.
- Environmentally friendly.
Application Procedure
Surface Preparation
- Clean the surface from grease, oil, fungi, dust, and dirt with sandpaper, brush, detergent, etching solution or others.
Mixing
- First coat: Thin Ultraproof with 10% clean water, mix well.
- Second and third coat: Without thinning. For vertical wall, you can add 10% clean water.
Application
- Apply first coat and let dry.
- Apply second and third coat in cross direction after 2 hours.
- Brush, roll, or airless spray can be used for application.
Recommendation
Hair Crack Bridging
- Mix well ULTRAPROOF and cement (1:1), add some water as needed. Fill cracks with the mixture using spatula..
- For bigger cracks, apply a mixture of ULTRAPROOF, cement and fine sands (1:1:1) add some water as needed..
- To cover cracks on roof tiles or flat roof, first apply ULTRAPROOF, follow by fiberglass mat or gauze on it. Then apply the mixture of ULTRAPROOF, cement and fine sands (1:1:1), add some water as needed..
Water Proofing or Flat Roof, Washroom or Water Basin
- Clean the surface.
- Fill cracks and holes with a mixture of ULTRAPROOF, cement, and fine sands (1:1:1), add some water as needed, mix well.
- First coat: thin ULTRAPROOF with 10% clean water, mix well.
- Second and third coat: ULTRAPROOF only (no thinning).
- Sprinkle with fine sands before it dries.
- Sweep away the excess sands.
**For flat roof, apply the cement mortar at least 2-4cm (use a mixture of ULTRAPROOF, cement and fine sands (1:1:1)), add some water as needed, mix well.
**For washroom or water basin, apply the cement mortar and ceramic tile on it accordingly.
Technical Data | |
Type | Elastomeric Acrylic Polymer |
Colour | 10 colours at choise (as shown in the colour card) |
Specific Gravity | +-1.2 gr/cc (depend on colour) |
Solid by Volumn | +-40% |
Material Consumption | 300 gr/m² (100 microns dry film thickness) |
Recommended dry film thickness | 300 microns DFT for waterproofing 300 microns DFT for rainproofing |
Application Tools | Brush or roll |
Diluent | Clean Water |
Drying Time | 60 minutes (30°C) |
Recoating Interval | Minimum: 2 hours (30°C) |
Packaging | 1 kg, 4 kg and 20 kg |
*Ultraproof is not designed to cover structure cracking.
Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.